Short CV/Education and training

  •  
    Post-Doc at the division of Energy Engineering at Luleå University of Technology.

  • 2000
    PhD – Chemical Engineering, Nanjing University of Chemical Technology, China

  • 1994
    BSc – Chemical Engineering, Nanjing University of Chemical Technology, China

Selected publications

  • Xie Y, Björkmalm J, Ma C, Willquist K, Yngvesson J, Wallberg O, Ji X. Techno-economic evaluation of biogas upgrading using ionic liquids in comparison with industrially used technology in Scandinavian anaerobic digestion plants, Applied Energy, in press.

  • Sarmad S, Mikkola J-P, Ji X. CO2 capture with Ionic liquids (ILs) and Deep Eutectic Solvents (DESs): a new generation of sorbents. ChemSusChem. 2017, 10, 324.

  • Shen G.; Held. C.; Lu X.; Ji X. 2016 Modelling interfacial properties of ionic liquids with ePC-SAFT combined with density gradient theory. Mol. Phys, 2016, 114, 2492.

  • Xie, W., Ji, X., Feng, X., Lu, X. Mass‐transfer rate enhancement for CO2 separation by ionic liquids: Theoretical study on the mechanism, AIChE J. 2015, 61, 4473.

  • Ji, X.; Held, C.; Sadowski, G. Modeling imidazolium-based ionic liquids with ePC-SAFT: Part II. Application to H2S and synthesis-gas components, Fluid Phase Equilibria. 2014, 363, 59.

  • Ji, X.; Zhu, C., Predicting possible effects of H2S impurity on CO2 transportation and geological storage. Environmental Science & Technology, 2013, 47(1), 55.

  • Ji, X.; Held, C.; Sadowski, G. Modeling imidazolium-based ionic liquids with ePC-SAFT, Fluid Phase Equilib. 2012, 335, 64.

  • Ji, X.; Zhu, C., A SAFT equation of state for the quaternary H2S-CO2-H2O-NaCl system. Geochimica et Cosmochimica Acta, 2012, 91, 40.

  • Ji, X.; Adidharma, H. Thermodynamic modeling of CO2 solubility in ionic liquid with heterosegmented statistical associating fluid theory, Fluid Phase Equilib. 2010, 293, 141.

  • Ji, X.; Adidharma, H., Thermodynamic modeling of ionic liquid density with heterosegmented statistical associating fluid theory. Chem. Eng. Sci. 2009, 64, 1985.

  • Ji, X., Tan, S., Adidharma H., Radosz M. SAFT1-RPM approximation extended to phase equilibria and densities of CO2-H2O and CO2-H2O-NaCl systems, Ind. Eng. Chem. Res., 44, 8419-8427, 2005.

  • Uhrig, G., Ji, X., Maurer, G. Vapor-Liquid Equilibrium in Systems (Water + Organic Solvent + Salt) at Low Water Concentrations but High Ratios of Salt to Water: Experimental Results and Modeling, Fluid Phase Equilibr., 228-229, 5-14, 2005.

  • Ji, X., Yan, J., Saturated thermodynamic properties for the air-water system at elevated temperature and pressure. Chem. Eng. Sci., 58, 5069-5077, 2003.

  • Ji, X., Lu, X., Zhang, L., Bao, N., Wang, Y., Shi, J., and Lu, B. C.-Y., A further study of solid-liquid equilibrium for the NaCl-NH4Cl-H2O system, Chem. Eng. Sci., 55, 4993-5001, 2000.



Complete list of publications

Contact

You can only see the contact information of the academics in the database if you are a registered user of AcademiaNet.
Please register here

Testimonials

  1. Read what our members say about AcademiaNet.

No more excuses!

  1. Please download the brochure "No more excuses" and read more about female experts in Europe, and about AcademiaNet.

Similar profiles

  1. Dr. Antonella Bogoni

    Engineering and engineering trades Telecommunicationsnonlinear optics

  2. Prof. Dr. Christina Berger

    Engineering and engineering trades , Physical sciencesResearch, testing, consulting, monitoring, certification, damage investigation in the fields of component strength and high-temperature properties of components made of metals, including light alloys, construction materials, plastics, compound and composite materials, surface engineering, tribology. Lectures on materials science and component strength, supervision of doctoral, bachelor's and master's theses, advanced design projects, as well as tutorials, internships and seminars.

  3. Prof. Dr. Kirsten Bobzin

    Engineering and engineering trades , Physical sciencesSurface engineering, materials engineering

  4. Dr. Iris Altpeter

    Engineering and engineering trades , Physical sciencesMicromagnetic testing methods